bridging 2 mtx 12"s..

[pr-festiva 10+ year member]

just an example

 

[DBBOOM 10+ year member]

im talking internal not external if his amp says 100x2 at 4 ohm,,200x2 at 2ohm,,then it should be 400 at 4 ohm mono,,which would be the bridged channle seeing half the ohm load wired to it right

If it is 400 at 4ohm, that means the final impedance allowed is 4 ohms. Quit making it hard, you can run 1 4 ohm SVC or 2 2ohm in series, to name the easiest.

 

[pr-festiva 10+ year member]

i think we just arrived at the same point,,lol

 

[DBBOOM 10+ year member]

And the amp only gets a 4 ohm load and only has 1 channel, i. e. 1 positive and 1 negative.

 

[vandiar2 10+ year member]

And the amp only gets a 4 ohm load and only has 1 channel, i. e. 1 positive and 1 negative.

I talked to someone at crutchfield that said bridging two 4 ohm subs would cause the amp to go into protect mode. Thanks for the responses though. im about to get a mono amp for the subs anyway

 

[scarolinablazin 10+ year member]

if you bridge 2 4ohm subs the amp will see 2 ohms each channel will see 1 ohm. the ohm load is split between the channels.

 

[standbackimapro 10+ year member]

Make sure you have a bridgeable amp, not all amps are oh and why do you wanna bridge a 2 channel amp?

 

[scarolinablazin 10+ year member]

Make sure you have a bridgeable amp, not all amps are oh and why do you wanna bridge a 2 channel amp?

why do most people bridge 2 channel amps?? you do realize everytime you reply to someone it shows more and more just how much you do not know. if you're really certified i'm glad i didn't waste any money on certification because apparently it doesn't actually teach you how to do anything.

 

[vandiar2 10+ year member]

if you bridge 2 4ohm subs the amp will see 2 ohms each channel will see 1 ohm. the ohm load is split between the channels.

yes this is what I wanted to know. Thank you. was looking to bridge it to obtain more power from my amp until I buy a mono amp for the subs

 

[scoob8000 10+ year member]

Jesus H!

WHAT AMP?

This is all purely speculation if we don't know what amp you have!

 

[pr-festiva 10+ year member]

ive been asking that from the get go lol

 

[oldschool4me 10+ year member]

Make sure you have a bridgeable amp, not all amps are oh and why do you wanna bridge a 2 channel amp?

what would you do if you had a single 4 ohm sub or two single 8 ohm subs?

would you run you single 4 ohm using just one channel of the amp?

would you run each 8 ohm sub one seperate channel?

explain please, im making no sence of your statement.