Box suggestions on ID overstock 12"s

[mattmcss 10+ year member]

Alrite, I've got a pair of these coming, they are the higher end ones with logo.

From what I get out of it, they are like ED's O series subs, heres a link to those specs

:::: http://edesignaudio.com/product.php?cid=2&pid=20&tab=Specs&cur=USD

Anyways, I've got approx 500 rms from 2 bridged channels from a kicker SX900.4 to power these biches, and I'd like to go sealed.

Bout what size box would you think for these so they will have good output with the relatively little power I'll be sending them ?

I've also thought briefly about going ported, but I really want these drivers to sound good, I'm sure they will, and I like having the ability to have great output, but they must also sound good with low-moderate listening levels. If I did port, they would have to be aeroports, I'm going to be fiberglassing this box in, slot port is out of the question.

Thanks !

Click to read more...

 

[mattmcss 10+ year member]

any suggestions ?

 

[ghart999 10+ year member]

Why did you get rid of the other sub setup. It looked sweet and I would think better than the new ones, no?

 

[Wkbdkid 10+ year member]

i have the same sub and just made a 2ft^3 @32hz box and it slams compared to a 1.5 sealed box. and i only have 250 watts going to it, pretty efficient sub might i add

 

[mattmcss 10+ year member]

any other inputs ? right now I'm leaning towards sealed, and around 1.25 cubes per driver, any thoughts ?