Box size and tuning for a low end monster

hatedonmostly
5,000+ posts

throwin' hunnits, hunnits
I currently have one AQ SDC2.510 in 1.5 ft^3 @ 40 and on 900W. My new setup is going to be four RE RE 12's on 1200W.

For the new setup, I want it to be a low end monster. This is going to be in the bed of a single cab Dodge Dakota. I want to be able to do hairtricks, which I don't think should be a problem considering how small the cab of the truck is and how much cone area I'll have.

For the subs, RE recommends 1.25-1.5 ft^3 @ 35. Is 35 really low enough for hairtricks, because I see a lot of people tuning lower for them.

I was thinking 30-33 Hz, but also don't want to lose my high end (40-50). But would I have to worry about that? Considering four 12's is six times the cone area of one 10", wouldn't it still be louder at 40 Hz, even if the box was tuned as low as 30?

And for box size, I have no clue. I see a lot of people with groundpounders have bigger boxes. 4x1.5=6.0 ft^3, or should I make it bigger?

All opinions would be appreciated...

 
I agree with the lows 30's tuning. If you make the box bigger it will decrease your mechanical power handling. I had an Fi Q on 500w in a 5.5 cube box. It hounded on the lows. One problem with the bigger box is that the higher notes sounded like ***.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

hatedonmostly

5,000+ posts
throwin' hunnits, hunnits
Thread starter
hatedonmostly
Joined
Location
Detroit, MI
Start date
Participants
Who Replied
Replies
4
Views
738
Last reply date
Last reply from
outsideshot23
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top