Box for e K's

[xjmadness 10+ year member]

ok i got these dimensions(exterior)

W=28

H=14

D=13

i calculated it out and got the internal volume to be 1.982 ft^3

can some1 calculate it and make sure i did it correct?

sub displacement=.08 ft^3 per sub

3/4 in MDF

3/4 in MDF brace(single piece divider)

 

[evo2k3 10+ year member]

{ [28-(0.75*3)] * [14-(0.75*2)]*[13-(0.75*2)] /12^3 } - 0.16 = 1.9821 ft^3....you got it!! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif good luck with that....personaly i think that center divider is plenty big for the bracing.....i dont know what other people think, but when i started building boxes i made a box for each sub and glued and screws them together....you get a little more solid of a box this way....but i think most poeple would generally think its overkill //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ngsm13 5,000+ posts]

yeah, i think the divider is enough for bracing...that's what i used on 2 of my boxes and they don't flex at all, no problems.

NG

 

[xjmadness 10+ year member]

sweet