box builder needed for cash

[king ranch 5,000+ posts]

i plan on hooking up a 1500.1 kicker amp to them

and also will have a 650.4 amp for the door speakers

and i have a brand new biggest battery possible made for my truck has over 1000amps

so i should be alright if not i can do the big 3

 

[BUMPING150S 10+ year member]

Just have him build the box and then talk about all the stuff your gonna do later.

 

[king ranch 5,000+ posts]

go read the last comment on the 3rd page he asked what i was going to do

so before you try telling someone to do to look all bad online go read b4 u speak

 

[BUMPING150S 10+ year member]

I have seen several posts on your boxes you need so far.

 

[BuckyBoy 10+ year member]

and one more thing i forgot to mention towards the back of the box there has to be a 2-3 inch cut it it bc there is a little hump in the floor when i remove the console i will take pics and get the exact spot it is

Let me know when you get those dimensions and that picture so I can get the final design and a price quote for you.

 

[BuckyBoy 10+ year member]

Here ya go king...

5.35ft^3 @ 33Hz

 

[king ranch 5,000+ posts]

i thought i described it better than that its a 5inch rise over a 14 inch period as in its a gradual slope dont worry bout it i will take pics so its easier for you to see what i mean

also i want the most airspace possible to so if its not 35 inches tall plz make it 35 inches tall

what would the airspace be then

 

[BuckyBoy 10+ year member]

i thought i described it better than that its a 5inch rise over a 14 inch period as in its a gradual slope dont worry bout it i will take pics so its easier for you to see what i mean
also i want the most airspace possible to so if its not 35 inches tall plz make it 35 inches tall

what would the airspace be then

I'm done making designs for you. When you figure out what you want, then send me a PM. You tend to leave out details until after the design has been made. Or you just completely change something after the design. Let me know when you have your mind made up.

 

[BobbyDD 10+ year member]

I'm done making designs for you. When you figure out what you want, then send me a PM. You tend to leave out details until after the design has been made. Or you just completely change something after the design. Let me know when you have your mind made up.

I don't blame you. I'd do the same unless he gives you a deposit.

 

[dbornotdb 10+ year member]

If your so worried about airspace issues, do a blow-thru.

I have done several of them. And you keep the metal you take out, tack it back in and your good to go if you need the hole filled up.

 

Don't ask for pics, don't have any on this computer...sorry.

 

[Immacomputer 10+ year member]

Wow, I was going to offer to design and build you an enclosure and even deliver it for a small price but after reading all this bullshit, I have decided not to even off it. You sound like the worst customer ever.