Box Build Help (Aeroport)

[JoeK 10+ year member]

I'd use a 9" aero for that size box.

What sub is that in your avatar?

 

[Flastrongman 10+ year member]

What sub is that in your avatar?

custom built Team RF 18

 

[Flastrongman 10+ year member]

Ok, I was lost ha thank you 2 6 inch ports im about to look at the length thank you all for your help..

they only come in 17" lengths, just leave them full length and cut down if you want to tune higher.

 

[Teezy 10+ year member]

they only come in 17" lengths, just leave them full length and cut down if you want to tune higher.

Alright, i will.

 

[fasfocus00 5,000+ posts]

just me but if you are insistent on using up all the space, IMO you should also consider a single 18" with a slot port. i'm a fan of the bigger boys like the 15s and 18s. plus a single sub will be easier on the wallet.

 

[FlexnInLa 10+ year member]

just me but if you are insistent on using up all the space, IMO you should also consider a single 18" with a slot port. i'm a fan of the bigger boys like the 15s and 18s. plus a single sub will be easier on the wallet.

That's what I did this time around, but I almost regret not going 2 15's again. I think next time around will be 4 12's.

 

[FlexnInLa 10+ year member]

Alright, i will.

I'd really suggest you read what I posted. That is from Nick himself... he knows what works for his subs man.

 

[Teezy 10+ year member]

I'd really suggest you read what I posted. That is from Nick himself... he knows what works for his subs man.

Which post ill be sure to read it?

 

[Teezy 10+ year member]

I'd really suggest you read what I posted. That is from Nick himself... he knows what works for his subs man.

Nvm i found it im about to read it now.

 

[RangerDangerV2 5,000+ posts]

Depends what you're doing.. I'm doing a. 2 Cube box for 2 12" atomic apx inverted with an 8" external aero. Burp box. For daily consider what he said ^ 4 cubes 6" aero

you will want more space for those atomics... at least my apxx did. not too sure on the apx. but testing will tell. testing testing testing testing duct tape testing testing testing lol

 

[Dirtrider4eva 10+ year member]

you will want more space for those atomics... at least my apxx did. not too sure on the apx. but testing will tell. testing testing testing testing duct tape testing testing testing lol

This is what a highly regarded member said. But after running basboxpro and winsid, 3.2cubes with 8" external seems to be money.

 

[RangerDangerV2 5,000+ posts]

This is what a highly regarded member said. But after running basboxpro and winsid, 3.2cubes with 8" external seems to be money.

seriously, dont use modeling programs. they are worthless fo an spl enclosure. but test this design and see if it works. just test test test test test. you can theorize all day, but until you actually test something, you dont know sh1t.

 

[Dirtrider4eva 10+ year member]

seriously, dont use modeling programs. they are worthless fo an spl enclosure. but test this design and see if it works. just test test test test test. you can theorize all day, but until you actually test something, you dont know sh1t.

Yes true. Especially with my new vehicle I know nothing about wagons. The design was somewhats orientated for my hatch. I might just complete it and sell it. I want 4 8s or 4 10s

 

[Teezy 10+ year member]

Would 2 5" ports be to much for 2 12" obsidian's?