Box build for Newarkbeast973

Mike465
10+ year member

Ami Creations
2,858
0
Kennesaw, GA
Ok everyone this box is for Newarkbeast973's three Sundown SA10's.

Box is 4.0 cubic feet with 48square inches of port tuned to 31Hz.

IMG_20101115_231811.jpg


IMG_20101115_232456.jpg


IMG_20101115_234147.jpg


IMG_20101115_234157.jpg


IMG_20101115_234403.jpg


IMG_20101116_004714.jpg


IMG_20101116_004708.jpg


IMG_20101116_004652.jpg


IMG_20101116_004652.jpg


IMG_20101116_004652.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
The tricky bit is that they're soft and floppy and they may be stretched a tad to go over the frames. I've used them in the past and come out...
6
2K
In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K
Thanks everyone for the feedback. I got scared of the 4th being to much for a newbie but did end up building a box to 2.1 Cubic Foot tuned to...
7
2K
Love this sub, hate AB's site, short on info for sure. American Bass XR-10D2 box recomend: If you want to tune a 2.75 Cu Ft box (for two of these...
11
3K

About this thread

Mike465

10+ year member
Ami Creations
Thread starter
Mike465
Joined
Location
Kennesaw, GA
Start date
Participants
Who Replied
Replies
12
Views
1,357
Last reply date
Last reply from
Mike465
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0
tip.gif

1aespinoza

    May 22, 2024
  • 0
  • 0

New threads

Top