tuomas 10+ year member
Senior VIP Member
Hello everyone, this is my first shot at designing and building an enclosure. I have 2 TS-W1207D4s which are 400w rms.
Current set up:
The box is probably giving about .75 foot^3 per sub...
This is what I have done so far... Please make any comments if you see a mistake I'm not too experienced with BassBox Pro.
Box should come out to about 40" wide 16" high and 15" deep
tuned to about 33.5 hz with a 2.25 inch wide port that runs 11 inches into box. Does it matter if the box does not have a second piece that creates a whole L for hte port?
This graph shows roughly comparison of new box to old box. The new ported box is in orange... old in green.
Current set up:
The box is probably giving about .75 foot^3 per sub...
This is what I have done so far... Please make any comments if you see a mistake I'm not too experienced with BassBox Pro.
Box should come out to about 40" wide 16" high and 15" deep
tuned to about 33.5 hz with a 2.25 inch wide port that runs 11 inches into box. Does it matter if the box does not have a second piece that creates a whole L for hte port?
This graph shows roughly comparison of new box to old box. The new ported box is in orange... old in green.