great news guys, the box is preforming very well and the system is just pouding, it is almost unbearably loud i used the AC current method to tweak the voltage with a few differant head-unit settings to achive the 36.06 current for 1300 rms per channel.
my question is on this chart does that voltage mean for 1 channel or the complete RMS of your amplifier at 1ohm ?
for example, would i set mine for 36.06 AC volts, or would i set it for the higher rated # for 2600 RMS. I am almost positive it is what you want each subwoofer to be reciving, I have been told that i have set it good on the steve maede forums i just got accepted to reciantly and those guys have been helping out tons.
I am going to get the BTL's most likely. Then build the new top wooden MDF half for my enclosure, port it to a more desirable frequency i want, then build up the electrical system to suppor the 2nd amplifier before i get that. Then get that, and away we go with 5200 RMS in the trunk ready to bang, in a larger enclosure with woofers that will do better in the reduced size.
Most people have said that the BTL's will sound much better in my space limitations than the SX's so it seems to be the best move, unless i could get some new tc5200's or LMS-ultra drivers, once my small claims court trial goes through with future shop ill get a pair of those maybe those things would be sooo awsome //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif
i have a complete short film to present as my case with all my evidence in it to the small claims court, hopefully it goes well. They messed up in too many areas, and admited to it to many times to get out of it they just think they can intimidate us because we are younger.
We will see what happens, will keep you guys updated !
-andrew out
P.S will have new video of the SX's slamming the shit out of my car in a day or so.