big system, little truck

[Loud3 10+ year member]

Depending on the bodydrop (conventional, or stockfloor) that could or could not mess with your audio plans. Either way, the floor will be raised, and you'll lose potental space. A blowthrough would still work, but you'd have to know for sure the extent of the bodydrop.

We did a blowthrough on a singlecab Sdime with a 3" stockfloor and didn't have a problem at all, but the bodydrop was already done by the time we got our hands on it.

Hit me up and I'll be able to point you in the right direction.

 

[2kchevy06civic 5,000+ posts]

I took out my center seat in my 2000 chevy silverado, I don't regret it either.

 

[swc204 10+ year member]

throw a shitload of re 8"s behind the seat........like the guy on ROE did with his regular cab.

 

[Omarvelous 10+ year member]

wuts a blow through?

It's when u cut the rear of the cabin.

Some then use part of the bed or all as an enclosure.

check ROE, xxx truck.

Lot of Avalanchers/EXTs do this.

 

[hcoronado 10+ year member]

check my gallery for some pictures! i am not done with it yet though!

 

[drgitfgt 10+ year member]

I saw your truck like the day I signed up on the site..it looks good..but I dunno that I'm willing to do this on my own..with having no experience in blow throughs and all..would it sound good?

:edit: I want to bring the box inside the cab just a few inches or so and tuck the rest into the bed (or however far outside the cab it goes)..

 

[maldecido33 10+ year member]

yea it'll sound good, and you have nearly an infinite amount of possibility with what you wanna do. use the whole bed as an enclosure.

http://truckinweb.com/tech/0511tr_view/index.html

look on the s10 forums, lotta guys there have done blow throughs

 

[drgitfgt 10+ year member]

hmmm...interesting. thanks a bunch! ..but what about when I go to notch my frame for my 'bags? I'll have to cut some of my floor out for the notch to come through and whatnot...

..and can somebody point me in the direction of an S-10 forum? thanks //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[maldecido33 10+ year member]

i don't know about the whole baggin ur truck and having that work w/ the blowthrough. never done that before.

 

[Loud3 10+ year member]

Go spend some time looking around http://www.streetsourcemag.com

Excellent people.

 

[xchaosx 10+ year member]

http://www.s10forum.com i'll tell you do a blow thru i did one way loud for a DD but you better wait untill you have it dropped and notched before you even bother with any of that you have no idea of box and how much airspace you will have it's not hard to do pm me if you need a coach or any tips and btw NO you will not be as loud close but NO

 

[drgitfgt 10+ year member]

well I might have everything sold now but I dunno..I've got some people looking at my setup...what are some estimates of what I could get out of everything? (the 3 10s, 3 amps, box, all wiring, brand new (never hooked up) Power Akoustics electronic crossover, etc...