Bi-amping subs in a mono sub box

[JettaGLI 10+ year member]

I currently have a jl audio 500/1 and 2 w3v2s. On the way I have 2 w6v2s. I have a fiberglassed box in my trunks wheel well. It does not have a seperate chamber for each sub.

If I volt tune 2 500/1 per jl's instructions, will it be ok to use 1 amp for each w6v2 in the type of box I have. It is sealed by the way.

Click to read more...

 

[androtaker 10+ year member]

well heres one thing you can do to make this project a little easier find a song with a steady beat and tune your amps as closely as possible then take 2 small car interior light bulbs turn your hu up about 25 percent and watch the lights light up make sure there at the same time and same brightness its alot easier then trying to see if one subs hitting as hard as the other one. now you will probably have to run the amps mono (left channel input (white or black what ever the color is for your system) this needs to be ran to both amps or simply run the amps mono and make sure the rca's are hooked up right. doing this will keep your subs alive longer once done kick anyones a$$ that gets near your amp controls...