Best buy 10" sub and amp ??????

Blazer1
10+ year member

Member
Hello guys,

I need to purchase a sub and amp for my son and really have no idea what I am doing. The system will be going in a 2001 F150 extended cab. He does not want to shake the earth just add a little bass to his factory system,...the way he put it was "I need a little bump but would like to be able to turn it up and impress".

I need this to be cheap,...I already blew our Christmas budget on wheels and tires and lift kit for his truck so if I can't get a couple or even one nice 10" and a box and amp for less than $200 he will not get the system,..wifes and moms never understand spending "all that money on a perfectly fine truck", LOL!!!!//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

Alright guys give me some suggestions!//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 
Does the truck still have the factory radio? Your son is gonna be like father, I am disappoint if you're only going to spend $200 on a sub, box and amp.

"Turn it up and impress" cost monies, a prefab box that holds two 10 or 12s and fits under the rear bench seat(so it's out of the way) is around $120~150 alone. You're looking at spending at least $450 for a decent box, 4 gauge wiring kit and subs. Add about $150 more if the truck still has the stock headunit(wiring harness, dash kit & the headunit), I do remember the stock door speakers in those F-150s are not that great either so you'll want to replace them too.

 
yea 200.00 will b hard to work with. mayb u can get a kicker cvr package deal or a mtx deal your only issue will the box fit cuz those deales come with one 12 or 10 or even a 8 somtimes with a amp and u would have to now worry about the box fiting . just get a ps3

 
Here is what I am leaning towards purchasing;

RE Audio SRI10D2- $59.00

Subwoofer Features:

10" Dual 2 ohm SRi Series Subwoofer

Power Handling:

RMS: 300 watts

Impedance: Dual 2 ohm

Kraft pulp woofer cone

Rubatek foam surround

Pressed steel basket

FEA optimized motor structure

Features

Foam gasket

4-Layer copper voice coil

Double stacked magnets

Authorized Internet Dealer

1-year Manufacturer's warranty

SRi 10" T/S Parameters:

Electrical Q Value (Qes): 0.39

Mechanical Q Value (Qms): 5.5

Total Speaker Q Value (Qts): 0.36

Free Air Resonance (Fs): 25.3 Hz

Equivalent Compliance (Vas): 31 liters

One-Way, Linear Excursion (Xmax): 18 mm

Efficiency (SPL 1W/1m): 85.3 dB SPL

Effective Piston Area (Sd): 310 cm^2

DC Resistance (Re): 1.8 ohm

Nominal Impedance (Znom): Dual 2 ohm

Thermal Power Handling (Pe): 300 W

Force Factor (Bl): 14.35

Sound Storm SSL F1200M- $79.00

Force Series Monoblock Amplifier

RMS Power Rating:

4 ohms: 200 watts x 1 chan.

Max power output:

2 ohms: 1200 watts x 1 chan.

Bridgeable

Wired remote bass level control included

LED power/protect indicators

Protection (thermal, overload and speaker short)

Bass Boost (0-18 dB bass boost at 50 Hz)

Tri mode operation

2/1 channel operation

Line and speaker-level inputs

Heavy duty aluminum alloy heatsink

Variable input gain control

Chrome-plated RCA level inputs

Chrome-plated screw terminals

Variable high-pass filter (200 Hz Fixed)

Variable low-pass filter (40-150 Hz)

Frequency response: 9-50,000 Hz

Damping Factor: 125

Dimensions: 9-1/8"L x 10"W x 2-7/16"H

4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.

1-year Manufacturer's warranty

How is this for $139.00? My son and I will build a box, I know this is junk to a lot of you guys but my son is impressed with his friends Radio Shack 6.5" self-powered tube.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Yes, this is just for the sub and amp, no wiring or box materials.

 
Alright guys,...I am ONLY looking for a sub and amp! I do not want a box, wiring, or anything else. I would rather spend all of my $200 budget on the sub and amp and we can deal with the other stuff later.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Blazer1

10+ year member
Member
Thread starter
Blazer1
Joined
Location
The Hills
Start date
Participants
Who Replied
Replies
25
Views
1,835
Last reply date
Last reply from
subdicted
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top