behringer ep1500

[swc204 10+ year member]

Can it be ran at 7 ohms? if so how much power would it be puting out?

Click to read more...

 

[PV Audio 5,000+ posts]

if it can be run and 8 and 4, 7 won't be a problem. w7 3 ohm coil....no amps rate at 3 ohms but the w7 gets along just fine.

 

[swc204 10+ year member]

if it can be run and 8 and 4, 7 won't be a problem. w7 3 ohm coil....no amps rate at 3 ohms but the w7 gets along just fine.

thanks......i just bought a 3.5 dvc sub. how much power would you think it would recieve?

 

[JimJ 5,000+ posts]

I'd say around 900 watts...as an extremely rough estimate. Its 8 ohm rating is 800W, so you figure it's getting a little more than that.

 

[swc204 10+ year member]

its perfect......thanks

 

[swc204 10+ year member]

What kind of cable and plugs are needed to wire it? i also want to use these cables somehow

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=181-644&scqty=1

heres the owners manual

http://www.partsexpress.com/pdf/248-747m.pdf

i want it to be balanced

also what kind of cable would i need to go from the output to the banana plugs on the box?

 

[JimJ 5,000+ posts]

You need some sort of a crossover for these things - because they don't have one built in.

And unless you have a balanced source, you can't use the XLR balanced inputs to their full advantage. Stick with RCA to 1/4" TRS adapters instead.

And you'll need 1/4" TRS to banana plug adapters, but PE as well as most pro audio shops stock those as well.

 

[PV Audio 5,000+ posts]

dude, those dayton sub cables are the best value ever. anyone who tells you that monster cable or anyone else is better, shoot them. i have the 15 foot and it is cleaner than my monsterbass one.

 

[swc204 10+ year member]

dude, those dayton sub cables are the best value ever. anyone who tells you that monster cable or anyone else is better, shoot them. i have the 15 foot and it is cleaner than my monsterbass one.

and its cheap. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[swc204 10+ year member]

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=241-870

would this work?

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=092-320&scqty=2

is this a 1/4" TRS to RCA plug? it doesnt say its a RCA adapter...

 

[swc204 10+ year member]

ttt

 

[JimJ 5,000+ posts]

Parts Express sells adapters that are RCA on one side, 1/4" on the other...it plugs into a TRS jack and gives you an RCA jack instead. Then, you simply run your RCA cables like normal. For the speaker wires, something like the first link you posted is what you need.

 

[swc204 10+ year member]

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=091-1010

found it.

thanks

 

[JimJ 5,000+ posts]

Yup, those are the ones...I've got a coffee cup full of them here //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[swc204 10+ year member]

how was the cable?