hello everyone. so i am attempting to installing a camera for my truck. the camera comes with a red(+) wire, black/red(-) wire and a yellow RCA connection. the back of my radio in the harness, there is a wire labeled reverse gear signal input purple/white stripe.
i ran the yellow rca to the headunit.
now for a few questions
do i run the red wire to a constant 12 volt?
if i do need a constant 12 volt, where do you suggest splicing into?
black/red will be ground
the purple/white stripe wire, is that the one that needs to be wired to the reverse gear signal AKA the green/white stripe wire?
the truck is a 2012 Nissan Titan crew cab with RF system. headunit is a pioneer avh-x8500bhs
thanks again
