Featured Audison wiring question

[brianksubs]

Hi all.

I’ve researched this and can’t find the answer. When wiring up the sub do I run off channel 1 channel 2 or bridge them. I don’t want to fry amp but don’t want to use half the amp. That is how I wired up to test the amp. Running a 2 ohm sub on it.

Thank you

Click to read more...

 

[mahc 10+ year member]

Both sets are internally linked. You're good.

 

[brianksubs]

Both sets are internally linked. You're good.

Perfect. Thank you.

 

[Mitchell Fosgate III]

Hi all.

I’ve researched this and can’t find the answer. When wiring up the sub do I run off channel 1 channel 2 or bridge them. I don’t want to fry amp but don’t want to use half the amp. That is how I wired up to test the amp. Running a 2 ohm sub on it.

Thank you

Is there a DC offset by you running off channel 1 and channel 2? Or bridge

 

[brianksubs]

Is there a DC offset by you running off channel 1 and channel 2? Or bridge

There isn’t or I think not. There is only one switch on amp. I believe the person above is right and it’s wired fine as is and using whole amp at 2 ohms