Ascendent Audio Assassin Motor

[whitedragon551 5,000+ posts]

Should be 1" 

---------- Post added at 07:48 PM ---------- Previous post was at 07:47 PM ----------

 

I got a pair of 10's for my dad and ran four 12's sealed myself...never did the 12's ported though, and have just been playing with my dad's 10's for the last few years.

The ones in question are a dual .75" slug. I have an Evo which also has a TC2+ motor and its got the dual 1" slugs and its 6.125" around not counting the boot.

 

[whitedragon551 5,000+ posts]

Should be 1" 

---------- Post added at 07:48 PM ---------- Previous post was at 07:47 PM ----------

 

I got a pair of 10's for my dad and ran four 12's sealed myself...never did the 12's ported though, and have just been playing with my dad's 10's for the last few years.

The ones in question are a dual .75" slug. I have an Evo which also has a TC2+ motor and its got the dual 1" slugs and its 6.125" around not counting the boot.

 

[RAM_Designs 5,000+ posts]

The ones in question are a dual .75" slug. I have an Evo which also has a TC2+ motor and its got the dual 1" slugs and its 6.125" around not counting the boot.

Weird, I'll check mine tomorrow morning and see what thickness they are. It could just be some sort of variance since the Assassins might have been suspension limited and didn't need the extra excursion that the 1" slugs would have allowed.

 

[whitedragon551 5,000+ posts]

The TC2+ motor is a dual 1" slug, but I know they have tons of variations as well.

 

[Mitch86 5,000+ posts]

OLD:

NEW:

 

[Mitch86 5,000+ posts]

OLD:

NEW:

 

[Mitch86 5,000+ posts]

 

---------- Post added at 08:05 PM ---------- Previous post was at 08:05 PM ----------

 

Apparently it wont let me post the old one.... but here is a link. http://web.archive.org/web/20060422043044/http://www.ascendantaudio.com/Images/Assassin-8-Side.jpg

 

---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------

 

Dont think it will help you identify it though. they look nearly the same to me //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif