Ap30001d

[mazdakid 5,000+ posts]

i have kicked the living crap out of of AP amps...subs...way more than any kind man should....no probs at all run the 1500 at .5 ohm no prob....but i am a ath dealer...and dont ever tell anyone to get any brand off ebay lol even some one i dont like.....17 years in 12v and ap has the best bank for the buck i have ever come across! i can get brand "x" off ebay and tell every 1 its junk...thats not a fair deal to any brand ebay is evil

what?

 

[Bass911 10+ year member]

I have 2 ap30001d's and no problems yet. I wonder why when this happens with JL, Kicker, and Rockford, the HATERS never say "that's what you get when you buy JL"

 

[audioatg 10+ year member]

I have 2 ap30001d's and no problems yet. I wonder why when this happens with JL, Kicker, and Rockford, the HATERS never say "that's what you get when you buy JL"

Because it doesnt happen. LoL

 

[SPLaudio 5,000+ posts]

i run stock 90 amp alt stock wet battery and a c&d liberty 1000 in the trunk. i dont drop below 12.8v for a 3 sec burp.

referbs and b stock if what people get off ebay and these cheap sites. i pay more than $300 and i'm a dealer so that should say something.

 

[audioatg 10+ year member]

i run stock 90 amp alt stock wet battery and a c&d liberty 1000 in the trunk. i dont drop below 12.8v for a 3 sec burp. referbs and b stock if what people get off ebay and these cheap sites. i pay more than $300 and i'm a dealer so that should say something.

Interesting. Even when the site says new. Its still not.

P.S. for the 3 secound burp what is it wired at bridged I assume too.

 

[djarmy2004 10+ year member]

OK well the subs are wired at 1ohm per sub, they are d2 subs so they are run at 1ohm per channel on that amp as the amp suggests. Second voltage is never an issue in my truck read my sig thats whats in there. I have checked with the dmm and im reading over 13 at all times and subs read .97ohm, with imp rise is prolly about 1.3give or take. I think i have a bad amp

 

[Bobby322 10+ year member]

If you have 2 d2 subs, thats 1 ohm per channel...that should work. Either electrical problem for you, or its the amp. It is 1500w @ 1 ohm per channel. I have mine at 2ohm a channel and it works fine.

 

[SPLaudio 5,000+ posts]

burp or dail i have ran it 1ohm depending what sub i run. piggest jump is running it at 1.4 from 2ohm,more power...

 

[mgcauctions09 10+ year member]

Because it doesnt happen. LoL

Yes it does and alot more often