Any chance to fit 3 12's w/ only 36" wide?

[Sleeklsc 5,000+ posts]

Well the back of my trunk is 36x18x16 (lxhxw) I want to see some possible box desighns that would work. Sealed..My old prefab was 39ish and obv wouldnt work..Any help?

Click to read more...

 

[RAM_Designs 5,000+ posts]

Try to stagger the subs.

 

[Bob Saget]

Not in a straight line.

 

[pro-rabbit 5,000+ posts]

in mosts cases your subs will be 12.5-12.75 out side diameter....with that said..you may be able to stagger them in there...you better be dead nuts with measuring and the router though.

 

[09civic 5,000+ posts]

What 12s were you gonna run? Jw

 

[Vossy 10+ year member]

go 2 12s ported into the cab?

 

[Sleeklsc 5,000+ posts]

This is a pic of my 2 12's in there now.

 

[pro-rabbit 5,000+ posts]

is that an 04 grand prix?

If so you have you do not have 36" it narrows about 1/8 to a 1/4..I can double check in the wife's car later though.

 

[Sleeklsc 5,000+ posts]

 

[outsideshot23 10+ year member]

itl fit

 

[Sleeklsc 5,000+ posts]

is that an 04 grand prix?
If so you have you do not have 36" it narrows about 1/8 to a 1/4..I can double check in the wife's car later though.

Mark viii lsc

 

[Sleeklsc 5,000+ posts]

What 12s were you gonna run? Jw

R's...I loved when i had 3 sealed @.67ohm. I have 2 hooked up @ around 1.6ohm final load now..Then the box wouldnt fit in the trunk were i wanted it..So i went w/2 instead.

 

[Sleeklsc 5,000+ posts]

Rear deck is a "blow through".

 

[pro-rabbit 5,000+ posts]

ah... It looked very similar in that first pic...but once I looked through the window I could see....

As for the design, you will have to play with staggering them, or do angles.

I would say two ported will work out much much better..

 

[Sleeklsc 5,000+ posts]

Never been a fan of ported but i know it will give me the output i so desperatly need. And i cant build a ported box for the life of me...