k_schutte 10+ year member
CarAudio.com Veteran
Hey guys... So, my computer is in the shop, will be for a little while so I don't have access to any of my programs. I was wondering if any of you box designers were bored and might wanna slap something together for me? I'm throwing my Orphan 8" in my boat, in a 4th order.
here are the max dimensions:
height: 17"
width: 18"
depth: 26"
I was planning to have the sealed chamber in top, ported on bottom. Sub occupying the sealed chamber obviously and firing down into the ported chamber. Port on the bottom, firing toward the rear of the boat. (so port would need to be in the "width" area). I was planning .3/.6 with the ported side tuned to 50hz~ but I am not a bandpass expert by ANY stretch of the imagination so...
Qts - 0.405
Qes - 0.442
Qms - 4.778
Fs - 34.289 Hz
Re - 5.25 Ohm
Ls - 12.16mH
Lp - 4.053 mH
Rp - 25.46 Ohm
Vas - 5.031 L
Mms - 214.1 g
Cms - 100.6 m/N
Bl - 23.39 T*m
Sensitivity - 78.44 dB
17mm Xmax
here are the max dimensions:
height: 17"
width: 18"
depth: 26"
I was planning to have the sealed chamber in top, ported on bottom. Sub occupying the sealed chamber obviously and firing down into the ported chamber. Port on the bottom, firing toward the rear of the boat. (so port would need to be in the "width" area). I was planning .3/.6 with the ported side tuned to 50hz~ but I am not a bandpass expert by ANY stretch of the imagination so...
Qts - 0.405
Qes - 0.442
Qms - 4.778
Fs - 34.289 Hz
Re - 5.25 Ohm
Ls - 12.16mH
Lp - 4.053 mH
Rp - 25.46 Ohm
Vas - 5.031 L
Mms - 214.1 g
Cms - 100.6 m/N
Bl - 23.39 T*m
Sensitivity - 78.44 dB
17mm Xmax