any bored designers?

[k_schutte 10+ year member]

Hey guys... So, my computer is in the shop, will be for a little while so I don't have access to any of my programs. I was wondering if any of you box designers were bored and might wanna slap something together for me? I'm throwing my Orphan 8" in my boat, in a 4th order.

here are the max dimensions:

height: 17"

width: 18"

depth: 26"

I was planning to have the sealed chamber in top, ported on bottom. Sub occupying the sealed chamber obviously and firing down into the ported chamber. Port on the bottom, firing toward the rear of the boat. (so port would need to be in the "width" area). I was planning .3/.6 with the ported side tuned to 50hz~ but I am not a bandpass expert by ANY stretch of the imagination so...

Qts - 0.405

Qes - 0.442

Qms - 4.778

Fs - 34.289 Hz

Re - 5.25 Ohm

Ls - 12.16mH

Lp - 4.053 mH

Rp - 25.46 Ohm

Vas - 5.031 L

Mms - 214.1 g

Cms - 100.6 m/N

Bl - 23.39 T*m

Sensitivity - 78.44 dB

17mm Xmax

Click to read more...

 

[k_schutte 10+ year member]

C'mon.... no one?!?!?? I can pay if you know what you're doing ;-) greedy bastards.

 

[k_schutte 10+ year member]

Well then... thanks anyways I guess