ANOTHER Rate my System Thread

[diesel_kid 10+ year member]

Alright, I know there is lots of these, but oh well, I am adding another one. Its for a 94 Dodge Reg. Cab Pickup.

HU - Alpine CDA-9835

Mids - Adire Koda 6s Run by Xtant 403A

Tweeters - Seas 27TFFC06 Run by Xtant 302A

Sub - Image Dynamics IDMAX 12 v.3 D4 run by PG Tantrum 1200.1 Or JL 500.1?

As for wiring I am just going to use some 1/0 Welding Cable, that would go straight to my Sub amp, then split off into some 4 gauge into my Speaker Amps.

Also I will be replacing all the speaker wire since its dirtcheap.

What else do I need as far as these powergrids, or dist. blocks, and caps and all them goodies? Thanks for all the info guys.

Click to read more...

 

[denim 5,000+ posts]

I lvoe the sub and amps

 

[skeptikal Premium Member]

that sounds like a dam good SQ setup and should get pretty loud with the 2 idmax's.

 

[iceteebone 5,000+ posts]

go with the tantrum over the jl 500/1 simply because it's more power but watch your gains. that tantrum will put out a healthy 1400 watts rms to that IDMAX. do not buy a cap. 1 guage wire to a fused distro block with 2 4 guage outputs will work. sounddomain has an rf agu one for like $25. looks good though. oh an of course couldn't forget this: //content.invisioncic.com/y282845/emoticons/needpics.gif.edd6d28e76618c28c46f343991bcced5.gif

 

[diesel_kid 10+ year member]

I will try and post up pics as soon as Im all done, I already have the HU installed, and the 403A, and 302A sitting on my floor, I am going to get the speakers real soon and hook all them up, then not long after get the sub and amp. Thanks for your opinions guys.

 

[luckiebrand13 10+ year member]

h2 rims on a ram? that would looks sweet imo. def post some pics

 

[AznRevlAzn 10+ year member]

H2 rims? how the f*ck...

I myslef have been thinking about putting my Dads Bronco Tires onto my car, lol.

 

[diesel_kid 10+ year member]

The H2 Rims are 8x6.5 bolt pattern, exactly the same as my diesel ram, the only thing was the centre holes were too small, they were 4.5" in diameter, I had to holesaw them to 4.75" in diameter. I mostly bought them for the tires, but the Nice Aluminum Rims were a bonus, then I topped it off with some new Dodge Hubcaps. I will get the pics up When I can.

 

[denim 5,000+ posts]

H2 rims? how the f*ck...
I myslef have been thinking about putting my Dads Bronco Tires onto my car, lol.

//content.invisioncic.com/y282845/emoticons/wacky.gif.cf4a48f9e6dfe9504ffd2c946fd2f340.gif

 

[luckiebrand13 10+ year member]

any pics yet??? come on man quit slacking for gods sakes man!