amps for mids and highs...

[3.5Max6spd 10+ year member]

But my Diamond Audios are rated at 60-120max. So pushing 110x2 will be fine IMO. Especially if I will be putting 1500 @ 1ohm to my subs. Again thats IMO!

I dont think you understand- If you bridge channel 1/2 to run your components, they will not play stereo sound- they will be mono - defeating the purpose of components or imaging altogether

I'm not saying it cannot be done, but judging that you are going for SQ its not a suitable choice

BTW- if you are running a single IDmax D4 you will not see 1500rms from that Hifonics

 

[knight007 10+ year member]

Oh I see what you mean. I will be running 2 ID Max 10s 4ohm DVC.

 

[3.5Max6spd 10+ year member]

knight007-Remember, you are running your rear speakers off the rear output on the crossover that Diamond M6's have- so you will be bridging ch1 with 2, 3 with 4 - putting the amp in 2ch mode -to send 220rms per side total- the crossover will distribute the power

Thats why M6's/Hex's are great- have very flexible crossovers for such applications

 

[knight007 10+ year member]

3.5Max6spd...Installation is scheduled for this weekend. I pray that I will experience the Harmony that everyone tells me about these Diamond Audios.