amp voltage drop help

  • 2
    Participant count
  • Participant list
It depends on your amp really. If you have a chart that came with the amp, it should have 13.8v to wattage chart, and a 14.4v to wattage chart to give you an idea of what power your seeing at whatever voltage.

 
It depends on your amp really. If you have a chart that came with the amp, it should have 13.8v to wattage chart, and a 14.4v to wattage chart to give you an idea of what power your seeing at whatever voltage.
ok.
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thank you all for all the replies, I intend to reply to each and every one individually as I test things out. Here's the latest development that...
13
2K
Yeah, put the probes on the power wire and ground wire of the amplifier. Multimeter on DC. Do not put it on the wires that go to your speakers. M
6
701
16.6 is way too high. That will destroy an AGM battery. What alternator brand did you use? Sounds like a voltage regulator issue. Are you...
4
2K
It depends on the brand. My JL has 500k Ohms, old Fosgate has 80k Ohms, and old Orion has 80 Ohms. These are the ones I had on hand for testing.
22
4K
Using Sky High copper OFC wiring and Stinger 8000 series rcas. The US Acoustics usx4085 is rated at 85X4 @ 12.9 volts and proably close to 100w X...
6
233

About this thread

Burp09

10+ year member
Senior VIP Member
Thread starter
Burp09
Joined
Location
meridian, ms
Start date
Participants
Who Replied
Replies
4
Views
637
Last reply date
Last reply from
Burp09
IMG_0005 (5) - Copy - Copy.JPG

Dan Medina

    Jun 17, 2024
  • 0
  • 0
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top