Amp suggestion for a pair of JL 13w7's?

  • 4
    Participant count
  • Participant list

urnvs
10+ year member

Junior Member
I have a pair of 13W7's running off a bridged Kicker KX2500.1 and it is cutting out when the really low stuff hits. Im looking for a suggestion for an efficient amp(s) to replace this one, that will really push these speakers to the limit.

 
So your prolly running the amp at 1.5 ohms I'd guess which shouldn't be an issue for the kicker. So either there is an electrical issue here or a bad amp But if the amp plays fine except when that heavy bass note hits. I'd more likely think it's a power issue. What alt and what batts ?

 
Yes, 1.5 ohms which is actually lower than the 2 ohms Kicker recommends. Mechman alternator and Deka AGM batteries.

Dont get me wrong, it hits loud as hell before cutting out, but I just feel that there is still more room to go as its not really sounding distorted.

 
Yes, 1.5 ohms which is actually lower than the 2 ohms Kicker recommends. Mechman alternator and Deka AGM batteries.
Dont get me wrong, it hits loud as hell before cutting out, but I just feel that there is still more room to go as its not really sounding distorted.
Check voltage at the amp when it cuts out. Also check for loose connections in all the wires. It maybe something real simple Rule out all possibilities before you replace the amp

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Great bang for the Buck/ Have (2)2ks and a 150.4. great amps for the Coin Thus far.A little head room doesnt usually hurt...
5
2K
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
153
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
278
Pretty much. It's just a nice kit. A solo rite Scarlett 2i2, XLR mic and a loop back cable are my next purchases so I can get accurate phase...
10
397

About this thread

urnvs

10+ year member
Junior Member
Thread starter
urnvs
Joined
Location
Phoenix, AZ
Start date
Participants
Who Replied
Replies
8
Views
729
Last reply date
Last reply from
bumpasauras
IMG_5860.jpeg

Brendon Jenness

    May 8, 2024
  • 0
  • 0
Screenshot 2023-12-02 161309.png

Doxquzme

    May 8, 2024
  • 0
  • 0

New threads

Top