Amp stops suddenly

Xowner
10+ year member

Junior Member
I recently had a 600.1 installed and it worked fine for about 2 day's before THE problem.

When I first turn the car on the amp comes on and play's for about 15 sec. then the bass stops. The amp light remains on and no additioinal lights come on from the amp beside the power light. When this happens I turn the HU off and then on again and I get the same 15sec. of bass from the single sub I run before it stops again. This cycle can repeat itself for aslong as I turn the HU off and on.

Any suggestions of what the problem might be? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 
hahhaha, funny shit, sorry.

well, check the ground. it seemed like if it used to work before. it might be going into protection mode (when it gets really hot). so i would say check the ground, n make sure there's no rust or anythign on the ground connection, just bare metal.

 
A losse wire would more then liklely not be your problem, necause how could a loose wire make itself come lose after 15 seconds, EVERY time? I'm thinkin you may have something internally wrong. Get in touch with JBL if neccasary.

 
I had it looked at this weekend and the installers checked everything. They re-did the ground and checked all the wiring except the sub internally in the box. They were had no idea what was making this all happen.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Xowner

10+ year member
Junior Member
Thread starter
Xowner
Joined
Location
Fayettevile, NC
Start date
Participants
Who Replied
Replies
6
Views
665
Last reply date
Last reply from
jbl_marshall21
IMG_0710.png

michigan born

    May 14, 2026
  • 0
  • 0
IMG_0709.png

michigan born

    May 14, 2026
  • 0
  • 0

New threads

Top