amp rack ideas

[king ranch 5,000+ posts]

i am trying to figure out how to mount my zx850.4 and zx1500.1 in this little space i have i was goign to mount the 1500 right in the middle and leave the 850 back in the stroage behind the plastic covering but it gets too hot and goes into protect so how can i make a amp rack to mount both since the panel is un even how can i do it

heres some pics

Click to read more...

 

[king ranch 5,000+ posts]

bump

 

[king ranch 5,000+ posts]

any ideas

 

[king ranch 5,000+ posts]

amps are too big for under seat and i can only mount one behind the back seat in the middle running horizontal

trying to figure out a way to run one horizontal and one vertical but its gonna be hard i think

 

[kovemaster559 5,000+ posts]

mount them then put a cover over them that displays the model

 

[king ranch 5,000+ posts]

huh i can only run one horizontal where the holes are is where i mounted one temp but i need to fogure out a way to mount the other

 

[kovemaster559 5,000+ posts]

i say mount them were you can have great access to them then build a cover for them so you dont see wires!

 

[king ranch 5,000+ posts]

well thats the prob i dont really have many places or ways to mount both amps

like the zx1500 i was gonna mount on the back wall and the sides will be right behind the back seats so the wires wont be visible or nothing

but i need a spot for my zx850.4

 

[king ranch 5,000+ posts]

any ideas on how to make it work and from the box to the wall only got like 15 inches so i cant mount them fro the box to the wall they have to be either one horizontal and vertical or both vertical

any ideas

 

[btdickey99 5,000+ posts]

how about search on here, or on google...lots of threads about this

 

[king ranch 5,000+ posts]

i did and cant find a situation like mine where there isnt alot of room

 

[king ranch 5,000+ posts]

bump

 

[BEAVER.989 10+ year member]

Could you run them both vertical? How wide and tall is the entire area you're trying to squeeze them into... and what are the dimensions of the amps?

 

[king ranch 5,000+ posts]

i have 24 inches from bottom to top and 12inches from the wall to the box and i have 16 inches from seat to seat across

only thing i was thinking of doing is running one horizontal where the holes are where i had one mounted and run the other one vertical but i got to figure out a way to make it work

or run both vertical and have the amps facing the seats as in back to back one amp on the passanger side and one on the driver side facing towards the doors

you know what i mean

 

[jdc753 10+ year member]

any chance you could pull off all that plastic along the back wall and then build something in there out of 1/2" mdf or so to mount the amps to that? Should be able to gain a few inches or so behind the seats with the plastic stuff gone and mount them both horizontal along the bottom of the wall or so.