Amp problemm :(

  • 2
    Participant count
  • Participant list

Steelemayne
10+ year member

Digital Designs
452
0
Arkansas
My amp shut off the other night so i figured that i blew a fuse or something...I checked all the fuses, none we blown, but replaced them all anyway. Then i checked all the wires also, everything was fine. then i just started wiggling some wires and all of a sudden it came on. Then it only worked for about 3 minutes and shut off again. I checked the wires, redid all of the wires, but it wont work at all...//content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
215
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
476
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
405
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
460

About this thread

Steelemayne

10+ year member
Digital Designs
Thread starter
Steelemayne
Joined
Location
Arkansas
Start date
Participants
Who Replied
Replies
2
Views
534
Last reply date
Last reply from
Steelemayne
Screenshot_20231208-164753.png

1aespinoza

    May 24, 2024
  • 0
  • 0
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0

New threads

Top