Amp Overload..why? new box pic..

[billabongcr 5,000+ posts]

last night i built my box for my SSD 10s and i like it alot..i throw everything in the truck to hear it..first..subs wont play, but amp is getting power..so i figure out that problem and now whenever i turn up the volume my amp blinks OVERLOAD like 10 times and shuts off (amp is a sx600.2, all digital so it has a screen)..turns back on..and starts playing again (after turning the volume down)

the sx600.2 is running the ssd's till my 2000d comes back.

i turned all the gains down on the amp..everything is at its minimum setting and its still doing it. as well as played with all the different settings (attack, red-line, contour) makes no difference.

i have an apline cda-9852 headunit. ive played with all the settings there. turned the subwoofer setting on and off, makes no differnce. played with all the bass engines and nothing seems to make any difference.

does anyone have any ideas?

EDIT: taking pictures now.

Click to read more...

 

[Worlddre 5,000+ posts]

impedance?

 

[billabongcr 5,000+ posts]

impedance?

subs: dual 1's.

amp: stable at 2 and 4 ohm.

wired the subs in 4 ohm

thats how i wired the subs

 

[billabongcr 5,000+ posts]

hard to see but its the best i can take right now. its bright out

 

[billabongcr 5,000+ posts]

no one has any ideas?

 

[jdawg 5,000+ posts]

pull subs out and double check that a wire didnt pop off

 

[luvinthebass 5,000+ posts]

sounds like a loose wire maybe

 

[billabongcr 5,000+ posts]

pull subs out and double check that a wire didnt pop off

i did twice. all wires are good.

 

[billabongcr 5,000+ posts]

sounds like a loose wire maybe

checked all wiring.

i think its something along the lines of my headunit sending too much power to my amp so its overloading?