Amp not turning on

orioles26
10+ year member

Senior VIP Member
I had to change the wiring on my subs and add speakers. Now that i did this the amp will power up sometimes but most of the time it wont even turn on. It will usually flicker on when i start the car but sometimes it will never come on or it will play for a little while while im driving then cut out again. What could be the problem because all of the wires seem to be connected and the fuse is not blown?

 
Two rockford fosgate p3 dual 4 ohms wired to 1 ohm on a hifonics 100d amp. The wiring to the head unit is fine because i did not change that when i redid the wiring of the subs. The only thing i changed was the wiring on the subs.

 
Maybe the remote wire got pinched. My friend had that happen a few times. Run a wire from the battery to the amps turn on and see if it turns on, if it does I would just put a new wire in for the turn on and see if that work. Just a thought //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
no he is saying run a wire from the battery's positive terminal to your amps remote input instead of the one coming from your cd player to see if that is the problem

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

orioles26

10+ year member
Senior VIP Member
Thread starter
orioles26
Joined
Location
Severna park, Maryland
Start date
Participants
Who Replied
Replies
10
Views
1,089
Last reply date
Last reply from
denim
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top