Amp newb Question

  • 2
    Participant count
  • Participant list

831area

Junior Member
15
0
Salinas
I have an Infinity Kappa One Mono amp for my subs that puts out 500w@4Ohms and 600w@2Ohms. My question is since it has terminals to Connect 2 subs, in order to put out that power I have to bridge the channels or it puts out that quantity on each channel?By channel i mean terminal or however you call it :3

 
It is a mono amplifier. The positive and negatives are linked inside the amplifier. You can use 1 or both connections and it does not make a difference to the amp

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
89
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
336
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
643
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
471

About this thread

831area

Junior Member
Thread starter
831area
Joined
Location
Salinas
Start date
Participants
Who Replied
Replies
1
Views
502
Last reply date
Last reply from
garychoffmann
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top