I have an Infinity Kappa One Mono amp for my subs that puts out 500w@4Ohms and 600w@2Ohms. My question is since it has terminals to Connect 2 subs, in order to put out that power I have to bridge the channels or it puts out that quantity on each channel?By channel i mean terminal or however you call it :3
Activity
No one is currently typing a reply...
Similar threads
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
- Started by RyanJ0022
- General Car Audio
- Locked
COMPLETED
WTB - Small Mono Amp WxDxH
NVX MVPA1
Best tiny amp
Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater
Can bump it all day long and barely gets...
- Started by AnthonyO
- Car Audio Wanted
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
- Started by saints747
- General Car Audio
Mine were as short as possible and still I had issues routing them cleanly
- Started by kanihoncho
- Wiring, Electrical & Installation
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
- Started by kanihoncho
- Wiring, Electrical & Installation
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 1
- Views
- 498
- Last reply date
- Last reply from
- garychoffmann
New threads
-
-
Head unit 1 output rcas, to 5 channel amp, LOC or 1 set off HU
- Started by RyanJ0022
- Replies: 6
-
-
-