Amp Help For BTL's

[Boomboy 10+ year member]

im trying to find an amp that will run 2 18" FI BTL's at around 3000 rms for daily use, i was thinkin the hifonics goliath as i have a hercules right now and love it, i have a 1100 dollar budget for an amp...thanks for the help

Click to read more...

 

[roarzorz 10+ year member]

Only 3,000 for the pair? You should put at least their rms rated 4,000 watts into them. For 3K though the RF T30001bd and Sundown 3000d are the first that come to mind.

 

[Boomboy 10+ year member]

Only 3,000 for the pair? You should put at least their rms rated 4,000 watts into them. For 3K though the RF T30001bd and Sundown 3000d are the first that come to mind.

i was tinking 3000 each but if that is too much ill just go for 2000-2500.

 

[Eat Italian 10+ year member]

I have taken a personal liking in this AMP after hearing it run a single 15" HiFonics Goliath.

http://www.conceptconcept.com/proddetail.asp?ID=283&ProductLine=Amplifier

RMS Power 1000W x 1 @ 4 Ohm

RMS Power 2000W x 1 @ 2 Ohm

Peak Power 3900W

Signal-to-noise ratio: 85 dB

Frequency Response: 10Hz - 250Hz

Total harmonic distortion: 0.05%

Continuously variable 0 - 18dB BASS boost

Built-in continuously variable 18dB per octave crossover

Remote bass level control port (remote RM-100 available separately)

Variable remote bass level control included

Input signal sensitivity: 0.2V - 8V

Voltage sensitivity: 200mV - 18V

Fuse Rating - (This amplifier draws between 350A to 400A.)

Backlit CONCEPT logo

Platinum connectors

Dimensions (L x W x H): 26" x 11" x 2.5"

Weight: 28 lbs

Yet none of those ratings mean shit because how many amps it draws. Not to mention it's fairly priced.

 

[04_edge 10+ year member]

memphis 4k

rf4000 or w/e its called.

edit: nvm 3k each.......

 

[roarzorz 10+ year member]

i was tinking 3000 each but if that is too much ill just go for 2000-2500.

It sounded like you only wanted 3K for the pair. 3K each should be good.

 

[BassAddictJ 5,000+ posts]

dude do your research. you can easily run 3-4kw PER sub if u know how ot set your gains. they need around 3k to do full justice. i mean they'll wang with 2kw each, but theyre better off with 2500-3000. just dont cause the amp to send a clipped signal by setting your gains too high.

1500w to each would definitly be underpowering them........

 

[BassAddictJ 5,000+ posts]

dude do your research. you can easily run 3-4kw PER sub if u know how ot set your gains. they need around 3k to do full justice. i mean they'll wang with 2kw each, but theyre better off with 2500-3000. just dont cause the amp to send a clipped signal by setting your gains too high.

1500w to each would definitly be underpowering them........

 

[davesexplorer 10+ year member]

I'm doing a Kicker KX2500 per BTL and it does just fine.

 

[Boomboy 10+ year member]

dude do your research. you can easily run 3-4kw PER sub if u know how ot set your gains. they need around 3k to do full justice. i mean they'll wang with 2kw each, but theyre better off with 2500-3000. just dont cause the amp to send a clipped signal by setting your gains too high.

1500w to each would definitly be underpowering them........

as i stated above i will be powering 2500-3000 a PIECE