Amp gain won't set high enough.

[Mustangfreak]

New to the forum and really would appreciate some help

Seriously dumbfounded now.

Have a set of Rockford fosgate p3 12s hooked to a Rockford fosgate 1200.1d amp.

Was working great and slamming hard.

Took my ***** out to put in a new clutch and got car back together and subs quit hitting.

Unhooked battery during work so never shorted any wires.

My issue is now that I cannot get my gain to even reach half what it was.

I set it at 34 which is the square root of the 1200 I was running. The subs were wired down to 1 ohm.

My head unit set at 3/4 way 26 out of 35. I just need some advice or maybe someone that has already had this problem.

Click to read more...

 

[LosIsATool 5,000+ posts]

The head unit probably reset. Go in and change the sub level back to where it was.

 

[Boomin_tahoe 5,000+ posts]

Does the amp work at all?

 

[dbjunior 10+ year member]

What voltage are you able to get out of it? Possible headunit setting from the battery being unhooked. Check all sub settings in the headunit.

 

[Boomin_tahoe 5,000+ posts]

Los got it. Once the power has been removed from the HU, everything gets set back to factory. Gonna have to re-tune the HU again. And then get back to us if everything is A-ok.

 

[Mustangfreak]

Yes powers on and checked voltage.

 

---------- Post added at 10:03 PM ---------- Previous post was at 10:03 PM ----------

 

Able to get about 14v

 

[kr15 5,000+ posts]

HU sub settings. Level, filters or both

 

[Mustangfreak]

I will do. I'll get back with y'all tomorrow and let y'all know. Thank y'all so much for the quick replays.

 

[Mustangfreak]

Hey guys. Recently checked all the settings. None of that worked. But I'm going to do a total HU reset later today. It's a Kenwood.

KMM-BT515HD

 

[Mustangfreak]

Hey y'all. Sorry I got lost in work. Ended up being my amp. Luckily still under warranty. Got a new one and got the power I needed. Sounds awesome again!

Thanks again you guys!