am i getting ripped off?

[jjoven1225 10+ year member]

he's talking about kicker amps... getting 2-1200.1 is good too.. especially you're not paying for it... i suggest getting two of them have them installed.... then take one out and give it to me .. remember 1200.1 needs 0guage power input and need 150 amp fuse.... while 600.1 only needs 4 awg and 60 amp fuse.. so if you get 2-1200.1 you'll definately need to change your alternator...

or option 2.... have them install, tell me where you live, and i'll steal one..

if you get just one 1200.1 is good too.. but if the amp blows you have no amp and have to wait 'till it gets repaired, unlike if you have 2-600.1 you still have a lil boom while it's getting fix //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[MikeofTulsa Moderator]

figured that out when he pm'd me....

 

[badazzDD 10+ year member]

Originally posted by jjoven1225 he's talking about kicker amps... getting 2-1200.1 is good too.. especially you're not paying for it... i suggest getting two of them have them installed.... then take one out and give it to me .. remember 1200.1 needs 0guage power input and need 150 amp fuse.... while 600.1 only needs 4 awg and 60 amp fuse.. so if you get 2-1200.1 you'll definately need to change your alternator...

or option 2.... have them install, tell me where you live, and i'll steal one..

 

if you get just one 1200.1 is good too.. but if the amp blows you have no amp and have to wait 'till it gets repaired, unlike if you have 2-600.1 you still have a lil boom while it's getting fix //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Actually, 4awg poer wre and a 100amp fuse is pleny for 1 1200.1.. to use 2, you'd have to use 0 gauge into dist. block with 2 4awg outputs..

 

[jjoven1225 10+ year member]

Originally posted by badazzDD Actually, 4awg poer wre and a 100amp fuse is pleny for 1 1200.1.. to use 2, you'd have to use 0 gauge into dist. block with 2 4awg outputs..

sure you may be right, but kicker recomends 150 amp fuse.. and about the power wire, the whole is big enough for 0 guage.. you can put smaller wires ofcourse but they recomend bigger..