I have the setup I wanted now so I'm selling my temporary sub setup I ran for a little bit.... Everything is in great condition as is **** near everything i sell.....
Specs on Sub.....
Dual 4 ohm voice coil
# Kevlar reinforced pulp cone with Santoprene™ rubber surround
# cast aluminum frame with perimeter venting
# frequency response: 26-600 Hz
# power handling: 200-500 watts RMS (250 watts per coil)
# peak power: 1,500 watts
# sensitivity: 83 dB
# top-mount depth: 6-7/8"
# sealed box volume: 0.5-0.8
# ported box volume: 0.6-1.3
Specs on Amp.....
Mono subwoofer car amplifier
# 220 watts RMS x 1 at 4 ohms (400 watts RMS x 1 at 2 ohms)
# variable low-pass filter (50-200 Hz, 24 dB/octave)
# tuned Bass EQ (0-12 dB bass boost at 50 Hz)
# subsonic filter (15 Hz, 24 dB/octave)
# MOSFET power supply
# CEA-2006 compliant
# STAR Topology (minimizes internal noise and prevents ground interference)
# speaker- and preamp-level inputs
# gold-plated screw terminals
# fuse rating: 20A x 2
# 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
# 9-3/4"W x 2-3/8"H x 9-9/16"D
I bought the box from a shop around here.....
The dimensions are 17" X 16" X 13"
Do Not Want to Seperate....
$250 for everything shipped anywhere in the United States.... NO CANADA!!//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Oh and I only accept Paypal..... AND I SHIP FED EX PRIORITY!!!
Specs on Sub.....
Dual 4 ohm voice coil
# Kevlar reinforced pulp cone with Santoprene™ rubber surround
# cast aluminum frame with perimeter venting
# frequency response: 26-600 Hz
# power handling: 200-500 watts RMS (250 watts per coil)
# peak power: 1,500 watts
# sensitivity: 83 dB
# top-mount depth: 6-7/8"
# sealed box volume: 0.5-0.8
# ported box volume: 0.6-1.3
Specs on Amp.....
Mono subwoofer car amplifier
# 220 watts RMS x 1 at 4 ohms (400 watts RMS x 1 at 2 ohms)
# variable low-pass filter (50-200 Hz, 24 dB/octave)
# tuned Bass EQ (0-12 dB bass boost at 50 Hz)
# subsonic filter (15 Hz, 24 dB/octave)
# MOSFET power supply
# CEA-2006 compliant
# STAR Topology (minimizes internal noise and prevents ground interference)
# speaker- and preamp-level inputs
# gold-plated screw terminals
# fuse rating: 20A x 2
# 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
# 9-3/4"W x 2-3/8"H x 9-9/16"D
I bought the box from a shop around here.....
The dimensions are 17" X 16" X 13"
Do Not Want to Seperate....
$250 for everything shipped anywhere in the United States.... NO CANADA!!//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Oh and I only accept Paypal..... AND I SHIP FED EX PRIORITY!!!
