alpine mrv-100m help

[Wowimzz 10+ year member]

my friend is trying to hook one of these up to an old school w6 10, and he called me for help, but i dont know what to do. He says its a mono, but it has 2 channels, and they both say they are mono. help, i need to figure out how to do this for him. i told him to just wire the positives up on the amp, and then wire up the positive to the sub, and then the negative to the amp. i thought that this would yield a 1.5 ohm load? he says the amp is 1.3 ohm stable and it puts out 300 wrms? help plz

Click to read more...

 

[Wowimzz 10+ year member]

we got it hooked up to 1 channel, @ 3 ohms, if we bridged the channels it would be at 1.5 ohms correct? will the amp handle that?

 

[Wowimzz 10+ year member]

a lil help here please =/. all i want to know is how to brige the amp, if it is even bridgeable. i think i have a general idea, if it is like wiring a dvc subwoofer. if i can bridge the amp, in parallel it would be 1.5 ohms correct? and in series 6? The sub for sure is a svc 3 ohm, becuase i checked it with a dmm. any help will be appreciated.

 

[Slaugh 10+ year member]

user of 2 alpine amps here... here's what i can do to help

http://www.stylestandard.net/oswego/Rooms/FrameMacro?Container=com.webridge.entity.Entity%5BOID%5BEA1657426FF4A34780EA61C1E60FC12C%5D%5D

http://www.stylestandard.net/oswego/Rooms/RoomComponents/AssetView/AssetCount?qDocID=com.webridge.entity.Entity%5BOID%5BDEED71CB7B2027439DC5C06B46B6EBA7%5D%5D&Container=com.webridge.entity.Entity%5BOID%5BC53DBE016C83534F9E9C12BB9394ED36%5D%5D

seems to be very easy to do... good luck

 

[SHOtime 10+ year member]

way to post a useless link!

 

[Mr. Opportunist 10+ year member]

if its svc how are you wiring it to 1.5ohm? just bridge the channels and run it like that.