rideac1
10+ year member
SoundFactory
I have an Alpine MRP-f240 4 channel, running 4 mbquart coax's.
Just recently I can not turn it up to a high volume, it cuts out and tries to start back up every few seconds. It will play to the same volume every time. My sub amp continues playing though.
I figured maybe a voltage drop makes the amp shut off, but I tried doing it with the sub amp off, and the same ordeal happens.
I tried running just 1 speaker at a time to see if maybe it was overloading or something.
Then, I took the ground off and put it back on, and it works fine.
It also gets really hot fairly quick.
I'm thinking it is just going, i've used it on a daily basis for about 2 years.
Just recently I can not turn it up to a high volume, it cuts out and tries to start back up every few seconds. It will play to the same volume every time. My sub amp continues playing though.
I figured maybe a voltage drop makes the amp shut off, but I tried doing it with the sub amp off, and the same ordeal happens.
I tried running just 1 speaker at a time to see if maybe it was overloading or something.
Then, I took the ground off and put it back on, and it works fine.
It also gets really hot fairly quick.
I'm thinking it is just going, i've used it on a daily basis for about 2 years.
