AERO port help

[basscort2009 5,000+ posts]

port displacment is more than .08 im pretty sure i did the forumla right on the above qoute. .34 plus .25 sub displacment

 

[basscort2009 5,000+ posts]

yes that info is important

well i dont know how i would find that out. owners manual? if i still have it maybe lol

 

[slam 5,000+ posts]

fill ur car up with peanuts lol

 

[slam 5,000+ posts]

are u pro trunk?

 

[basscort2009 5,000+ posts]

nope amatuer trunk. i already got finals locked up. curtis already has my ring //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[basscort2009 5,000+ posts]

fill ur car up with peanuts lol

funny thing is i have enough to do that but i dont think im gonna tackle that monster

 

[SWFL 10+ year member]

port displacment is more than .08 im pretty sure i did the forumla right on the above qoute. .34 plus .25 sub displacment

4" ports and 6" long two of them

2x2x3.14=12.56x6" long=75.36/1728=0.04361 is disp for one port so two would be 0.0872

not sure where you are getting .34 my 6" aero 10" long only took up .16

why not use an 8" aero or a single 6" for just a bit more port area??

 

[basscort2009 5,000+ posts]

cant use an 8" aero only pvc. remeber i am covering a slot port with a face with aeros. the opening is only 8"wide. 8" aeros are wider than that at the flare. i think i am going to go with 2 6" aeros for a little over 50 inches of port. that should be close to minumum spl port area

 

[skmfkr 5,000+ posts]

why do u think all texas uses the kick?

cuz i see alot of usaci and tbp in texas

 

[sikcavy 10+ year member]

buy my 2 4 inch ports and use 4 of them

 

[Buck 5,000+ posts]

12-16 per cube. In your box you would need at least 3 4" aeros and 4 would be better. It'll work but might have port noise or not get low.
If you can somehow make those 4"s to 6"s and use 2 6" aeros you would have enough

That is slot port, not aeros.

You can use 2 4" aeros. You can also get pvc pipe possibly to use to make the aeros longer. I'm not sure if they will fit inside of the ring that attaches to the flare, but it might work. I would go bigger if possible. Say 3 4" aeros. Or a 6" or two. Just makes sure that your box doesn't become too small.

 

[dappa5 10+ year member]

no one is getting it lol kill this thread please!!!

he wants to tune higher i.e. shorter ports but he's already @ flare to flare

hell just take inner flare off just use the outer flare as entire port lol no flare on inside but still efficient lol will do what you want lol FTW give it a shot

 

[basscort2009 5,000+ posts]

buy my 2 4 inch ports and use 4 of them

i dont have room. i said i only have room for 2 6s or 1 8

 

[basscort2009 5,000+ posts]

no one is getting it lol kill this thread please!!!he wants to tune higher i.e. shorter ports but he's already @ flare to flare

hell just take inner flare off just use the outer flare as entire port lol no flare on inside but still efficient lol will do what you want lol FTW give it a shot

yea ppl cant read i guess. thanks for actually knowing wtf im tryin to ask lol. i was gonna try one flare but i was scared of losing efficiency and turbulance to cause a score loss. i will give it a shot though i dont have any other choice lol

 

[mazdakid 5,000+ posts]

no one is getting it lol kill this thread please!!!he wants to tune higher i.e. shorter ports but he's already @ flare to flare

hell just take inner flare off just use the outer flare as entire port lol no flare on inside but still efficient lol will do what you want lol FTW give it a shot

if you do that, put the flare on the inside of the box and have the non flared part of the port external