Aero Port aera ?

[thecartel252 10+ year member]

How do you calculate the port area of areo port and how much port area needed per cu. ft. using areo ports?

Click to read more...

 

[Slo_Ride 5,000+ posts]

A=Pi®^2

 

[Slo_Ride 5,000+ posts]

8-12 square inches for every cubic foot is the general rule. But I've learned that different subs like different amounts of port area.

 

[basebalz13 10+ year member]

12-16 sq inchesper cubic foot //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[amartin_72]

14-16 inches of port area usually only sounds good at full tilt, not lower volumes.

 

[mbrooky 10+ year member]

iirc it's half the diameter of the port x 2 x 3.14 x #of ports

so for example 4 4" ports will be 2 x 2 x 3.14 x 4= 50.24 sq in of port

or 2 6"ports is 3x2x3.14x2=37.68

 

[Slo_Ride 5,000+ posts]

iirc it's half the diameter of the port x 2 x 3.14 x #of ports
so for example 4 4" ports will be 2 x 2 x 3.14 x 4= 50.24 sq in of port

or 2 6"ports is 3x2x3.14x2=37.68

nope, 2 6" =56.52

Circle Calculator - Calculate Area, Diameter, Circumference, and Sector of a Circle - Online arithmetic calculators

 

[mbrooky 10+ year member]

nope, 2 6" =56.52Circle Calculator - Calculate Area, Diameter, Circumference, and Sector of a Circle - Online arithmetic calculators

yeah my number did look a little low lol

 

[basebalz13 10+ year member]

aero ports you dont need as much port area as slot port