adding aftermarket actuators to factory keyless entry?

[Spooney 10+ year member]

is it possible to use an aftermarket door lock actuator in place of a factory unit? i have a 99 ford taurus and all but one lock is non functional.they all receive power when i press the remote and jerk a little bit but they just dont have the balls to unlock the door.While searching the net i've found that the ford units are junk and replacements generally dont last long and also run abour 50 to 60 bucks per door.If possible id like to add aftermarket actuators to the factory keyless entry system.Is this even possible?

Click to read more...

 

[ngsm13 5,000+ posts]

Yes, you'll need to find an aftermarket 5-wire actuator though, as since it's a ford it'll more than likely be 5-wire.

nG

 

[joel_perks 10+ year member]

is it possible to use an aftermarket door lock actuator in place of a factory unit? i have a 99 ford taurus and all but one lock is non functional.they all receive power when i press the remote and jerk a little bit but they just dont have the balls to unlock the door.While searching the net i've found that the ford units are junk and replacements generally dont last long and also run abour 50 to 60 bucks per door.If possible id like to add aftermarket actuators to the factory keyless entry system.Is this even possible?

go to http://www.suicidedoors.com/front_page buy the shaved door lock solaniod

it will pop that **** no prob

 

[ngsm13 5,000+ posts]

go to http://www.suicidedoors.com/front_page buy the shaved door lock solaniodit will pop that **** no prob

That would be ignorant.

nG

 

[Spooney 10+ year member]

i believe they are actually two wire.does anyone know of a decent actuator to use?i've heard the ones from parts express aren't too good

 

[joel_perks 10+ year member]

he is right about the five wire but one wire is for ground 1 is for power one way the other is for power the other way and the last will be for the alarm just figer out witch is witch

 

[joel_perks 10+ year member]

That would be ignorant.
nG

what is ignorant about this http://www.suicidedoors.com/door-poppers/autoloc-35-pound-solenoids/autoloc-35-pound-solenoids

 

[ngsm13 5,000+ posts]

i believe they are actually two wire.does anyone know of a decent actuator to use?i've heard the ones from parts express aren't too good

Directed, Heavy Duty ones. They're worth the few bucks more...

nG

 

[joel_perks 10+ year member]

man i have thos open my sucide doors every day without a problem

 

[ngsm13 5,000+ posts]

man i have thos open my sucide doors every day without a problem

He needs door lock actuators you ignorant rtard. NOT door poppers.

nG

 

[gl0ck 10+ year member]

99 should be a 2 wire setup if you have factory keyless, Directed heavy duty or Omega DS2.1 will be your best choices.

 

[Ferendon 10+ year member]

what is ignorant about this http://www.suicidedoors.com/door-poppers/autoloc-35-pound-solenoids/autoloc-35-pound-solenoids

Besides the fact that it is a solenoid and not an actuator? It only works one direction, ****tard.