ABP12T and A8002T together?

[Damien8 10+ year member]

Two 12" 400wrms 4-ohm single voice coil subs with this 2-channel 800wrms amp??? Ideas and suggestions are appreciated

Click to read more...

 

[Cbass 10+ year member]

That amp is a little overrated but it'll do the work just fine

What do you want spl or sq?

Box size?

Sealed or ported?

 

[PhatTonyDeMarco 5,000+ posts]

The amp puts out 800w @ 4 ohms, so you will only get ~200w each to the subs. I had this same setup as my first one, and it will get loud... If you have the amp already, go for it. If not then get an A8000T, it will do the 800w @ 2 ohms. If you must stick with Audiobahn...

 

[Cbass 10+ year member]

I used to have that amp and you could run it at 2ohm mono all day long without problems... believe me i did it.

 

[Cbass 10+ year member]

But if you can change it for the A8000t it will be much better and more safe

 

[PhatTonyDeMarco 5,000+ posts]

I used to have that amp and you could run it at 2ohm mono all day long without problems... believe me i did it.

I call BS on that.. I tried it and the amp went into protect mode within 5 minutes.

 

[analogkid]

I call BS on that.. I tried it and the amp went into protect mode within 5 minutes.

well that means the build quality varies or the subs used in each setup had to do alot with it.........