About to start construction, NEED tips!

If you don't have a table saw, use a circular saw and use a square to follow for you straight line. Then a Jig saw, liquid nails and some wood screws and WA Laa. Now all you need is the patience and the steady hand which alot of us don't have.

Just be advised you first box will not come out perfect. But you must start somewhere and practice will make your future box builds go much easier.

 
If you don't have a table saw, use a circular saw and use a square to follow for you straight line. Then a Jig saw, liquid nails and some wood screws and WA Laa. Now all you need is the patience and the steady hand which alot of us don't have.Just be advised you first box will not come out perfect. But you must start somewhere and practice will make your future box builds go much easier.

and do NOT use expanding glue on clean joints. WOOD GLUE is the only glue you will need. (titebond or good ol' ELMERS)

 
and do NOT use expanding glue on clean joints. WOOD GLUE is the only glue you will need. (titebond or good ol' ELMERS)
Hell yeah Elmers FTW //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Patience and a square = no screws needed. I dont even use clamps //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif As long as your cuts are clean....I should get some though lol...
 
No idea, just get wood glue FTW. No use wasting it.

Also if you can get your hands on a table saw, do it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif On my current project, I got to borrow a table saw finally. DId the cuts in a fraction of the time, with perfection //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif PIMP

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

xpl0it

10+ year member
CarAudio.com Elite
Thread starter
xpl0it
Joined
Location
everywhere
Start date
Participants
Who Replied
Replies
20
Views
1,105
Last reply date
Last reply from
Fast1one
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0
IMG_20260513_213956814.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top