A8000t Amp Quit On Me!!!!!

[revrider1 5,000+ posts]

Do you have any local electronic repair shops, If you do take it over for they can take a look at it. It only cost 30 bucks to fix mine, if it does have the same problem mine had.

 

[Daher2323 10+ year member]

bassbeast i just fixed my problem. It was the fuse up by the battery. Mine was blown, and replacing it ($5) fixed the whole problem. Hopefully yours is as easy as mine was. Good luck

 

[saywhat? 5,000+ posts]

Maybe i could hook it all up so it on protection then while its still on unhook the power wire at the battery and then hook it back up maybe it will reset it!!!

or cause an explosion.

 

[seth1987 10+ year member]

Well I had that exact same problem, even the bumping noise coming from the sub, disconnected the rca's and it still did it, I found out my ground was loose, so I re-ran the ground and it all worked out, maybe you can do the same, good luck

 

[bizzy07 10+ year member]

I used to have one of these amps and it did the same thing to me i couldnt figure it out but when i moved the ground wire to a complete different place it started working again

 

[zfactor 10+ year member]

thats audiobahn for ya garbage worst stuff we ever sold dropped that line faster than any other...

 

[BassBEAST88 10+ year member]

I found out my front fuse was burnt a little in the middle but is still attached and works well my car has a fuel safety shit off switch which it hooked to a spot welded peice of metal so i hooked it there i will try it BUT WAIT I FOUND OUT MY friend ran the + - Off my amp to the + - on his amp i figured it prob fried the amp //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif huh

 

[BassBEAST88 10+ year member]

? Anyone ??

 

[bizzy07 10+ year member]

he hooked the two amp together?

 

[BassBEAST88 10+ year member]

+ - on mine to + - on his then my amp went on prot he said? Wont come off now still turns on and everything?

 

[DiamondFanatic 10+ year member]

I suppose you might've blown a channel. I have no idea why you would ever hook up two amps that way in the first place.

 

[BassBEAST88 10+ year member]

Well in the first place i wouldnt my friend did wasnt aware i was wiring up his sub. Is there any way to rapair a channel would the channel make the prot light stay on!

 

[BassBEAST88 10+ year member]

Anyone else have any clue??

 

[BassBEAST88 10+ year member]

its def the amp because i just hooked another amp upto it and its all worked great!! But i wouldnt run the amp just tested it its a kenwood kac-744 4 channel amp!

 

[bizzy07 10+ year member]

yea i would say you blew somthing up that was the stupidest thing i have heard someone do you should smack ur friend lol