A couple of box designs which one to choose.

  • 2
    Participant count
  • Participant list

caseyarndt
10+ year member

Senior VIP Member
202
0
West MI
This box is for a dd9515 and will be in a Chevy Cobalt coupe on 2000 watts.

Each box has the same outside dimensions(32x16.5x22), tuning(36.5hz), and cubic feet(4.15)

I am going by DD's box specs for the tuning and airspace.

Box#1: 67.5sqin port, Double Baffled, and some bracing

Box#2: 75sqin port, no DB, no bracing

I cannot go any bigger on the outside dimensions.

What do you guys think?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I relocated the head unit ground, and I also put plastic wire loom tubing over the RCA cables since they sit on the bare metal floor under the...
6
1K
12V is well within the range of acceptable voltage for most mobile electronics. How much power you're leaving on the table not feeding your amps...
6
2K
The SIA is a great line of amps. People like to hate. My little SIA does work with 4-8's. And it bangs the lows.
23
7K
Start by laying the larger bottom panel in an open space, then slowly “dry” assemble it by laying the pieces where they go like a puzzle. It...
1
418
These are also very good drivers, some of the best bang for the busk on shallow mounts. DD Audio SL610-D2 10"...
5
757

About this thread

caseyarndt

10+ year member
Senior VIP Member
Thread starter
caseyarndt
Joined
Location
West MI
Start date
Participants
Who Replied
Replies
1
Views
547
Last reply date
Last reply from
Buck
IMG_0005 (5) - Copy - Copy.JPG

Dan Medina

    Jun 17, 2024
  • 0
  • 0
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top