93 Ford Probe Wiring - Help!

[benjhind]

I have a 93 Ford Probe. It came with the premium stereo option which included an amp.

When I bought it, one of the audio harnesses was cut. The power side works fine. The other side has the following wires:

light blue/black

yellow

purple/white

white/red

light blue

light green

white/orange

brown

one bare silver wire

Do these need to be hooked up to a line level (RCA jack) or a speaker level line on my deck? My understanding is that these wires go to the factory amp which under the rear right speaker.

Thanks!

Click to read more...

 

[benjhind]

This is what the cut harness looks like.

http://i125.photobucket.com/albums/p48/benjhind/DSC_0068.jpg

Pins are as follows (as oriented in the picture in the link):

1 2 3 4

5 6 7 8

1 - light blue

2 - purple/white

3 - brown

4 - white/red

5 - yellow

6 - light blue/black

7 - white/orange

8 - light green

one bare silver wire - grounds to outside of case. Where do these wires go? Should they go to a line level input or a speaker level input?