'92 Mazda 626 Single Death row build.

[daveishome 10+ year member]

So.. what should the song be for the sub's first chune??

 

[Loudmp5 10+ year member]

I would use torres box calc... And deff get more port area before making any vids lol

 

[jockhater2 10+ year member]

So.. what should the song be for the sub's first chune??

 

[daveishome 10+ year member]

I would use torres box calc... And deff get more port area before making any vids lol

Nahh, port area wont make that big of a diff lol.

 

[nkrell11 10+ year member]

Nahh, port area wont make that big of a diff lol.

Proper port area will make a huge difference you almost have them breathing through a straw with your current port I would up the port area so that sub can pound like it's supposed to.

 

[daveishome 10+ year member]

Proper port area will make a huge difference you almost have them breathing through a straw with your current port I would up the port area so that sub can pound like it's supposed to.

Alright, didn't think it would be a biggy, I will though.

 

[nkrell11 10+ year member]

If I had torres on my Mac I would try to help more but I'm almost worthless without it I'll see if I can't figure something out.

 

[daveishome 10+ year member]

Well, my box is 4.1 cubic feet and with a 4" hole I have to cut a bigger one to get more length.

7" is the longest I can get pre much tuned @30hz.

 

[daveishome 10+ year member]

Looked on Torres, does anybody think I should tune to 25.27hz with a port area of 12.56" with my box volume of 4.1 cubic feet?

I probably should have more port area but I don't want to cut a bigger hole, I listen to the lows mainly.

Or should I have like 40" lol.

 

[jockhater2 10+ year member]

Looked on Torres, does anybody think I should tune to 25.27hz with a port area of 12.56" with my box volume of 4.1 cubic feet?I probably should have more port area but I don't want to cut a bigger hole, I listen to the lows mainly.

Or should I have like 40" lol.

No. 30hz is already low. I wouldn't tune any lower.

 

[daveishome 10+ year member]

No. 30hz is already low. I wouldn't tune any lower.

@30hz I can get only get a few inches, looks like I'm forced to cut a bigger hole and put in bigger pipe, what a fuuck up.

 

[jockhater2 10+ year member]

@30hz I can get only get a few inches, looks like I'm forced to cut a bigger hole and put in bigger pipe, what a fuuck up.

wait what do you mean? I personally would tune between 32-34 but that is because I listen to more than just rap. I am not sure if that is why you are tuning so low

 

[daveishome 10+ year member]

wait what do you mean? I personally would tune between 32-34 but that is because I listen to more than just rap. I am not sure if that is why you are tuning so low

To get the right amount of port area I have to cut an 8" diameter with 23" length of port, that will give me 50sq" area tuned @33hz

 

[bowhunter 10+ year member]

back to the good deals on cars subject my brother just picked up a '99 honda crv with 86k for $300! cracked radiator! lol

 

[daveishome 10+ year member]

back to the good deals on cars subject my brother just picked up a '99 honda crv with 86k for $300! cracked radiator! lol

haha wtf.