$7 box designz/cutlists for the next 48 hours. PM or email me.

[bassman3 10+ year member]

Hey Members ~

I have some extra time on my hands for the next 48 hours and will be offering $7 designz/cutlists for a limited time. If you need one, shoot me a PM or email. It's for standard slot/sealed enclosures. If your wanting a kerfed port design, I will do it for $15 and I will tell you EXACTLY where you need to start your kerfs and how many you will need.

Nothing against you Mobeious lol

Thanks,

Dustin

Click to read more...

 

[*SlappinAzz*]

how about, you give me one free of charge, and i say whether or not your designs are good.

 

[bassman3 10+ year member]

how about, you give me one free of charge, and i say whether or not your designs are good.

I have many many references on this forum where people have been very happy with my designs. Got a couple already. To those who already PM'ed me, I will get them to you within the next couple hours.

Dustin

 

[bassman3 10+ year member]

Designs will be made via google sketch up as well. Designz will look like this:

 

[shields 10+ year member]

i need a ported box for four twelve mach five ixls. they require 1.4 cubic foot net with 20 sq in of port each and tuning of 30-33 hz. not sure on the displacemnt of the speakers.

box needs to be at 53 inches long x 14 inches wide and 20 inches tall max. if it can go smaller the height would be nice to be around 18 and then the length can be shortened. subs up and port preferable up

i kinda like the kerfed ports but dont know if i have enough room and i would like the subs to be flushed mounted if possible on my limited specs.

let me know if u can do this and how much it would be?

 

[bassman3 10+ year member]

i need a ported box for four twelve mach five ixls. they require 1.4 cubic foot net with 20 sq in of port each and tuning of 30-33 hz. not sure on the displacemnt of the speakers.
box needs to be at 53 inches long x 14 inches wide and 20 inches tall max. if it can go smaller the height would be nice to be around 18 and then the length can be shortened. subs up and port preferable up

i kinda like the kerfed ports but dont know if i have enough room and i would like the subs to be flushed mounted if possible on my limited specs.

let me know if u can do this and how much it would be?

Pm'ed

 

[RAM_Designs 5,000+ posts]

edit: nevermind

 

[Neel 10+ year member]

need a design for a cut through box. will need to have a 4'' lip hanging over the front baffle. can be 15'' by 48'' wide and however long. would like a center fire port. 2 10'' subs custom built they will see about 1000 rms a piece and need 1.2cubes each. tune to 38 area.

paypal ready let me know.

 

[shields 10+ year member]

pm'ed and payment sent

 

[bassman3 10+ year member]

PM'ed everyone back.

 

[bassman3 10+ year member]

Still accepting more offers. Will be extended for the next couple days.

 

[bassman3 10+ year member]

got a couple emails wondering if this was still being offered. It still is, so just let me know guys.