600w RMS into 1 channel at 2 ohms?

[Kaczman 10+ year member]

Hey guys, whats a cheap amp out there that can do 600w RMS x1 into 2 ohms, or 300w RMS x 2 @ 4 ohms? I got my friend 2 12" Infinity Reference 1230w and im trying to find him a cheap amp for these cheap subs in a sealed box.

Click to read more...

 

[DBfan187 5,000+ posts]

why don't you steal one?

 

[Kaczman 10+ year member]

Sorry, I dont do anything illegal.

 

[SSS 18734 5,000+ posts]

a Brutus 1000D would more than likely suit your needs, maybe step it up to the 1500D if you want the full 600 RMS

 

[Oldskool 10+ year member]

Autotek XS550.2 - 550 Watts X 1 @ 2 Ohms Bridged; 350 Watts X 1 Channel @ 4 Ohms Bridged. About 130 shipped on Ebay. Amp has been working great for my friend so far.....

 

[Prowler573 5,000+ posts]

If your bud doesn't mind used gear you can sometimes find a Kenwood Performance Standard (early eXcelon stuff) KAC-PS400M or an actual eXcelon-labeled KAC-X401M for a decent price.

I've got the KAC-X401M and it'll give ya 600w @ 2 Ohms or 300w @ 4 Ohms. (The PS400M does the same power....just not all the gadgetry as the newer unit)

Has a SSF (4 diff. selectable frequencies), 24dB/octave LP crossover, a cooling fan that doesn't try to fight the laws of physics, and a SIgma Servo feedback loop that, when connected properly, brings the unit's damping factor to 4-digit numbers. Reliable as can be no matter how hard ya bang on it in my experience.

Kenwood doesn't rate it to be 1 Ohm stable so I've never tried to run it that low but I have heard rumors of other people doing so without problem (I can't say I suggest doing so, however)

 

[Kaczman 10+ year member]

Great information. Thank you all.

 

[DBfan187 5,000+ posts]

Sorry, I dont do anything illegal.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

http://caraudio.com/vb/showthread.php?t=75797&highlight=kaczman