6 tweeters?

[dragnix 5,000+ posts]

use the hex

agreed. Just use the pair and sell the other two pairs.

Or you can just use the hex to see how loud it is and if you need to use the second pair, or just try out the mmats to see if it's better. Though i don't think the mmats won't be better than the hex. But don't quote me on it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[king ranch 5,000+ posts]

best thing to do is run 2 mids and one tweet per side, tweets are only really high freq's the main vocals will come from the mid's

 

[endofdays89 5,000+ posts]

best thing to do is run 2 mids and one tweet per side, tweets are only really high freq's the main vocals will come from the mid's

you have to add tweeters to any mids you ever install in your car. No matter what IMO! So, if he has 4 mids, he needs 4 tweeters.

edit: or two really powerful tweeters

 

[MmatsDude 10+ year member]

best thing to do is run 2 mids and one tweet per side, tweets are only really high freq's the main vocals will come from the mid's

yeah but the other set of mids would go were my sub box is wich is in the back seats(side to side on the back) i think the bass would over power them n wont hear nothing but i could be wrong since i havent tried it plus i dont think i would want to make holes for this second pair of mids on the front doors //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[king ranch 5,000+ posts]

no he can run 4 mids and two tweets and be fine dude, you are a retard go look at most setups they have 2 mids in a door and a tweet, yea you need tweets but most of the vocals will come from the midrange mids vocal range i recall is only up to 1khz i think i may be wrong but its somewhere around there

and put a mid in the door and put the comps in the kicks, or get glassed doors to mount the mids in

 

[MmatsDude 10+ year member]

agreed. Just use the pair and sell the other two pairs.

Or you can just use the hex to see how loud it is and if you need to use the second pair, or just try out the mmats to see if it's better. Though i don't think the mmats won't be better than the hex. But don't quote me on it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

the extra pair of tweets i have are mmats just the tweets

so if i just use the hex then im going to bridge my amp so they could get all the power?

 

[endofdays89 5,000+ posts]

no he can run 4 mids and two tweets and be fine dude, you are a retard go look at most setups they have 2 mids in a door and a tweet, yea you need tweets but most of the vocals will come from the midrange mids vocal range i recall is only up to 1khz i think i may be wrong but its somewhere around there
and put a mid in the door and put the comps in the kicks, or get glassed doors to mount the mids in

i don't know. I would have to hear it first before i add any extra tweets. I take that back

 

[dragnix 5,000+ posts]

the extra pair of tweets i have are mmats just the tweets
so if i just use the hex then im going to bridge my amp so they could get all the power?

is your amp a 4ch and are you going active?

 

[MmatsDude 10+ year member]

no he can run 4 mids and two tweets and be fine dude, you are a retard go look at most setups they have 2 mids in a door and a tweet, yea you need tweets but most of the vocals will come from the midrange mids vocal range i recall is only up to 1khz i think i may be wrong but its somewhere around there
and put a mid in the door and put the comps in the kicks, or get glassed doors to mount the mids in

how much would some glass doors cost?

put the comps on the kicks? kicks????

would a baffle work for the second pair of mids on the front doors?

 

[MmatsDude 10+ year member]

is your amp a 4ch and are you going active?

yeah its a memphis 4 channel

what is going active?

 

[dragnix 5,000+ posts]

yeah its a memphis 4 channel
what is going active?

so then i'm guessing you won't be bridging that amp for your tweets

 

[king ranch 5,000+ posts]

yea the kick panels put a comp set in teh kicks one mid and tweet per side in the kicks and then put a mid in each door that gives you 2 mids and one tweet per side, you can buy q logic pre made kicks for around 150-200 bucks depends on wat car you have, you can get custom ones made best way to go or do them yourself, i have a place intown that does them for 120 for the pair for basic painted kicks can get different finishes for up to 200 bucks

 

[MmatsDude 10+ year member]

so then i'm guessing you won't be bridging that amp for your tweets

oh i see what your talkin about now

nah no active :]

yeah i might as well sell the second pair of components 5 1/4 diamond audio components i tried to see were the mid could lay flat on the door but my door doesnt have a completely flat spot for them to lay completely i have a flat spot but it curves and the mid is of by an inch were it starts to curve im going to sell this and purchase some 4 inch components those should fit

 

[MmatsDude 10+ year member]

yea the kick panels put a comp set in teh kicks one mid and tweet per side in the kicks and then put a mid in each door that gives you 2 mids and one tweet per side, you can buy q logic pre made kicks for around 150-200 bucks depends on wat car you have, you can get custom ones made best way to go or do them yourself, i have a place intown that does them for 120 for the pair for basic painted kicks can get different finishes for up to 200 bucks

q logic doesnt carry those for my car

can you hook me up with those kicks that your shop makes? lmk

 

[king ranch 5,000+ posts]

even if the door isnt flat it doesnt matter cut out a hole use a baffle and seal the gaps where the door may go in or out