5 channel amp

Or use the nine.5 to run an active front stage and a sub stage, leave the rears powered off the HU. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
very good
ed nine.5

run the fronts crossed over about 120Hz

you could run the 3's and 6.5s in parallel (I may not)

run the rears crossed over at about 80-100Hz

you could run the 6x9s and 5.25s in parallel (I may not)

ed nine.5 will handle the impedances and crossovers.

cross the sub whever sounds good between 80-120

so even if my budget was higher for an amp the ed nine.5 would be my best bet?

 
the ed9.5 is on major sale, it's a pretty high end amp.

The fosgate 1000 you were looking at is more powerfull,

but to get that power will require heavy electrical upgrades.

 
I too am interested in the Power1000.. I have an US Amps AX5600 75x4 + 500x1... You also could look at the Directed 5 channel or the new Polk 5 channel
The new Polk 5 channel looks pretty promising. I am pretty sure that DEI owns Polk now.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

corbett123

10+ year member
Junior Member
Thread starter
corbett123
Joined
Location
Flemington, NJ
Start date
Participants
Who Replied
Replies
40
Views
3,769
Last reply date
Last reply from
mike70wu
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0
IMG_20260513_213956814.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top